FROM HEMP'IN
Three US hempcrete homes, three methods, three prices, and the labour behind them
A cast-in-place house in Colorado, a panel house in Minnesota and a block house in the Rockies came in at $260 to $400 a square foot. The cheapest was the one built fastest.
Hemp'in
10 October 2026 · 3 min read

Three hempcrete houses went up in the US this summer, each built a different way, and their builders' cost estimates differ just as much. HempBuild Magazine profiled them on 5 October: one cast in place in Colorado, one assembled from factory panels in Minnesota, and one laid in hemp blocks in the Colorado mountains. Put side by side, they show where the money in a hemp house goes.
Three houses, three methods
Littleton, Colorado: cast in place. Healthy Hemp Homes, led by builder Eric Milburn, built a two-bedroom house with 12-inch hempcrete exterior walls cast in place and 4.75-inch hemp block interior walls, with Hemp Building Company doing the hempcrete. About 200 bags of hurd came from South Bend Industrial Hemp in Great Bend, Kansas, with lime from South Dakota. The exterior walls went in over two weeks, followed by about two more weeks of detail work. Milburn's estimate: about $400 a square foot.
Moorhead, Minnesota: prefab panels. For developer Grassroots Development and builder Echo Homes, Homeland Hempcrete of Bismarck, North Dakota, supplied prefabricated hempcrete panels for a 1,049-square-foot, two-bedroom house. About 9,250 pounds of hurd came from Dakota Hurd Company in Fargo and Prairie PROducers in Olivia, Minnesota. Installer Matt Marino and three helpers, none of them experienced with hempcrete or prefab, assembled and braced the panels in three days. Reported cost: $260 a square foot, not counting land and utilities.
Alma, Colorado: hemp blocks. Owner-builder Stephen Dickenson is building a 3,900-square-foot, four-bedroom house on a steel post-and-beam frame, with HempBLOCK International blocks making up 80 percent of the walls. Part of the wall work was done during a three-day class with eight attendees. His estimate: about $330 a square foot, depending on fixtures.
Where the money goes
Milburn told Denver7 in August that the material is not the expensive part: "Where you actually spend money is the labor, and that's where I'm trying to speed up this project."
The three houses are hard to compare directly. They differ in size, finish and site, and the figures are builders' own estimates. But the order fits Milburn's point. The house built with the least skilled on-site labour, the panel house assembled in three days by a mostly inexperienced crew, came in lowest. The fully site-cast house came in highest.
What it means for growers, processors and buyers
For hurd processors, these are real orders. Two of the three named their hurd suppliers, all from Kansas, North Dakota and Minnesota. Every one of these walls is a market for hurd, the woody core of the stalk.
For builders, the lesson matches what Australian and EU reports have said this month: hemp walls get cheaper when the work moves into a factory or a repeatable system, and when crews do not need years of specialist training.
For home buyers, these estimates suggest the more of the wall work happens on site, the higher the price per square foot. The Moorhead developer plans to use the house as a short-term rental showcase before renting or selling it. The Alma house will be a HempBLOCK demonstration home with overnight stays. Those choices show the market is still at the stage of letting people walk through the walls.
Sources
- Under Construction: 3 US Hempcrete Homes Built This Summer, HempBuild Magazine, 5 October 2026
- 'No-brainer': Homeowners ecstatic over first hempcrete house built in Jefferson county, Denver7, 18 August 2026
How did this land?
Field check
Does this match where you work?
No answers yet. Members, be the first.
Ask the desk
The conversation
Open in LIFENo one has replied yet. Start the conversation.
WRITE FOR HEMP'IN
Have a story from the hemp industry?
Join Hemp'in and publish your own articles to everyone who reads News.
MORE FROM HEMP'IN NEWS

A rubbery coating let recycled plastic hold up to 60% hemp hurd and soak up far less water
Hemp'in · 17 November 2026

900 changes later: what 46 days of building Hemp'in looks like
Hemp'in · 17 November 2026

A wall's direction mattered more than its insulation, a year in an old French building shows
Hemp'in · 16 November 2026