FROM HEMP'IN
Hemp's THC test tightens on 12 November. Fibre and grain growers want 1 percent
The US switches to a total-THC limit next month. Growers and processors on the industrial side say a 1 percent limit would open up higher-yielding fibre and grain varieties.
Hemp'in
11 October 2026 · 2 min read

In a month, the US will measure hemp in a stricter way. Some fibre and grain growers say the new limit is still set for the wrong crop, and they want it raised to 1 percent.
What changes on 12 November
The FY2026 agriculture appropriations law rewrote the federal definition of hemp. According to the Congressional Research Service, the new definition counts "a total [THC] concentration (including tetrahydrocannabinolic acid [THCA])" of "not more than 0.3 percent on a dry weight basis", and it takes effect "after November 12, 2026." Until now, the 2018 Farm Bill limit counted delta-9 THC only.
The CRS notes that the new definition explicitly covers industrial hemp, meaning hemp grown for stalk, grain, oil, cake, nut or hull, as well as "hemp used for fiber or for immature plants." It does not treat those uses differently. The farm bill the House is working on, H.R. 7567, would require industrial hemp to be separated from hemp grown for cannabinoids. That split was the subject of our 5 October story.
What fibre and grain growers say
Speaking to AgNavigator on 8 October, Morgan Tweet, chief executive of Montana processor IND Hemp, said the change in definition does not majorly affect the company's industrial production. According to the article, IND Hemp works with about 4,000 acres and buys from many growers in Montana and Washington. Tweet said those growers "are doing well", and described hemp as a competitive rotation crop that tends to raise yields the following year and improve soil penetration and water retention.
Tweet is also involved in the Goodness of Hemp campaign, which wants the total-THC limit raised to 1 percent. The reason given is agronomic, not consumer-driven: a 1 percent limit would "allow more genetics that have higher yield potential for grain and fiber crops to come to the market."
The idea already has bills behind it. The CRS lists S. 2112, which would allow up to 1 percent delta-9 THC, and H.R. 9830, which would allow up to 1 percent total THC.
AgNavigator also reports that the Hemp Feed Coalition, which Tweet leads, secured AAFCO approval for hemp seed meal in feed for laying hens and is pursuing approvals for other livestock.
What it means for growers, processors and buyers
For growers, 12 November changes how a field is tested, not what a fibre or grain crop is for. The practical risk is a variety that passes on delta-9 but fails once THCA is counted. Checking total-THC results on this year's seed lots before buying for next season is the obvious step.
For seed breeders and processors, the 1 percent push is about the variety catalogue. If it passed, varieties now ruled out by the 0.3 percent line could be planted for fibre and grain. Until then, they stay off the table.
For feed buyers, the laying-hen approval opens one market for hemp seed meal now, with others depending on approvals still in progress.
Sources
- US hemp production faces a regulatory crossroads as loophole set to close, AgNavigator, 8 October 2026
- Changes to the Statutory Definition of Hemp and Implications for Agricultural Policy (IF13136), Congressional Research Service, updated 17 August 2026
How did this land?
Field check
Does this match where you work?
No answers yet. Members, be the first.
Ask the desk
The conversation
Open in LIFENo one has replied yet. Start the conversation.
WRITE FOR HEMP'IN
Have a story from the hemp industry?
Join Hemp'in and publish your own articles to everyone who reads News.
MORE FROM HEMP'IN NEWS

A rubbery coating let recycled plastic hold up to 60% hemp hurd and soak up far less water
Hemp'in · 17 November 2026

900 changes later: what 46 days of building Hemp'in looks like
Hemp'in · 17 November 2026

A wall's direction mattered more than its insulation, a year in an old French building shows
Hemp'in · 16 November 2026