Hemp'in News

FROM HEMP'IN

Australia's hemp houses go to the factory, with a $2M state grant behind them

A New South Wales builder is setting up a hemp-lime panel plant near Coffs Harbour. Its bet: prefab panels, cheaper hurd and paid-for fire tests will take hemp homes past the owner-builder market.

Hemp'in

8 October 2026 · 3 min read

Hemp'in News cover: the headline beside a woven hemp pattern on oat paper, with the A$2M grant figure.

An Australian builder is betting that hemp houses will scale the way timber frames did: in a factory, as panels. The business behind home builder Otetto Homes and panel maker Living Canvas is setting up what it calls Australia's first large-scale hemp panel plant in Toormina, near Coffs Harbour in New South Wales, backed by a AUD 2 million state grant, HempBuild Magazine reported on 7 October.

What happened

The grant comes from the NSW Government's Agriculture Industries Innovation and Growth Program. The state's July announcement lists AUD 2 million for Yieldtech Enterprises Pty Ltd in Coffs Harbour, to set up a regional facility that "converts Australian-grown hemp by-products into prefabricated building materials for the construction sector". That release does not name Otetto or Living Canvas, but the amount, place and purpose match. According to HempBuild, the grant is a co-contribution that the company matches with AUD 2 million of its own.

The money buys production equipment from Swedish manufacturer Randek, including flipping "butterfly" framing tables. Co-founder Chris Ball said the idea was to borrow what already works: "Why are we reinventing the wheel for this manufacturing equipment when it already exists on a larger scale."

The product

Living Canvas casts hemp and lime into wall, floor and roof cassettes. "Essentially, we're a frame and truss manufacturer that has hemp already cast into the walls," Ball said. HempBuild gives these figures:

  • Walls: 280 mm thick, rated R4.25 (Australian metric R-value).
  • Roofs: a different mix with no sand and less compression, reaching R6 at the same thickness. Roofs are "where we see the most return on investment," Ball said.
  • Speed: the company's display home went up in four days, roof included, with three days of crane lifts. "We thought that the lifting part would be the bottleneck, but we were the bottleneck installing," he said.

Panels were chosen for "familiarity", Ball said: builders already know how to stand up a prefabricated frame.

What it means for growers, processors and buyers

Growers and processors are the feedstock side of this. Ball said hurd costs the company around AUD 1,500 a ton today and he expects that to fall to a few hundred dollars a ton within five years. A fall like that would most likely need more hurd processed close to the plant, which is where the expansion plan points: HempBuild reports the company plans a second facility co-located with a grower, sized for about 1,000 homes, or 500,000 square metres of panels, a year.

Builders and buyers will watch certification. The company has applied for a further AUD 2.5 million grant for fire and other certifications needed for wider approvals, including commercial work. "Once we unlock those tests, the sky's the limit of the applications," Ball said. Its panels have already been announced for a basketball court in Brewarrina.

The market is still small. Ball estimates 200 to 400 hemp homes have been built in Australia, about 60 percent of them by owner-builders. He said wider uptake depends on the payback on the higher upfront cost: "If we can get it under eight years, I think that the game's over."

Read alongside the EU assessment reported on 5 October, which rated hemp-lime high on environmental performance but held back by standards, supply chains and trained installers, the Australian approach takes on two of those at once: factory panels to cut the need for specialist crews, and paid-for testing to build the evidence certifiers ask for.

Sources

How did this land?

Field check

Does this match where you work?

Anyone can read the counts.

No answers yet. Members, be the first.

Ask the desk

Questions go privately to the desk.

The conversation

Open in LIFE

No one has replied yet. Start the conversation.

WRITE FOR HEMP'IN

Have a story from the hemp industry?

Join Hemp'in and publish your own articles to everyone who reads News.

MORE FROM HEMP'IN NEWS